Auto/Digital Levels

STONEX D1 digital autolevel is the recommended leveling instrument for contractors, builders, professionals land surveyors and Engineers who demand accurate leveling every time. The accuracy of ± 1.5 mm on a base of 1 Km – double run – makes STONEX D1 the perfect equipment for the 3rd order leveling and for construction industry. Faster automatic measurements – difference in height and distance – are digitally determined: the fully electronic measurement results appear in the clearly visible display window after less than 2 seconds.

DESCRIPTION

Error free measurements improve the quality of your field works
The fully automatic measuring ability and digital display excludes any reading errors and other possible human-made errors. Combined to the the increased productivity, up to 50% compared to the performances of a traditional optical level, with all leveling work carried out automatically, will greatly improve your professionality and profits.

Fast, friendly, smart
You’re only required to get the bubble within the black circle on the bubble vial, from there the STONEX D1 automatic compensator takes over and precisely levels itself. Just press the Easy one-touch operation key, and get instantly ΔH and HD, displayed on the LCD display. Using STONEX D1 as distance meter you can get measurements up to 80 m. STONEX D1 features the IP54 certification, it means safe works even in harsh weather conditions. The onboard adjustment program, height difference calculation, inverse staff measuring mode and error checking enable the user to execute the complete calculations set directly in the field.

High accuracy digital level

Stonex D2 digital level is the right solution to use when you need to measure gradients or height with better precision compared to GPS systems. GPS systems normally provide accurate measuring on plane (horizontal) but not in vertical direction, due to the position of satellites, all on the same side of sky compared to the GPS receiver

DESCRIPTION

To use together with a barcoded stadia for high precision measurements, the Digital Level D2 provides an height accuracy of 0,7mm/Km. This makes the D2 an ideal level not only for high order levelling but also deformation measurements and precise surveying, as well as general construction. The onboard adjustment program, height difference calculator, inverse staff measuring mode, in combination with various measuring configurations enable you to execute all calculation.

Key Features:

• The internal memory can store up to 2000 measures (points) that can be downloaded on a computer by an RS232 serial port
• Easy to transport
• Water and dust protected and allow long operation on field (about 16 hours).

The right solution for measure gradients or height precision GPS systems

Optical Autolevels

The new STAL 1000/1100 Series autolevels are immediate to set up and use.
Accuracy up to 1 mm/Km (double run leveling) makes STAL 1032 one high accuracy autolevel, even for monitoring and engineering works.
Horizontal knobs with an unlimited range ensure precise pointing while the circle, graduated in DEG or GON, gives angular measurements.

DESCRIPTION

The new, redesigned optic, is so bright that let you use the new STAL autolevels even in low-light conditions, thanks to the wide objective aperture (40 mm).
STAL 1100 are available with 28X and 32X telescope, and give accuracy from 2mm/Km to 1.5 mm/Km. STAL 1000, with the same telescope magnifications, thanks to the high accuracy automatic air damping compensator, features higher accuracy, up to 1.0 mm/Km on a double run leveling (STAL 1032). STAL 1100 offer minimum focusing down to 0.4 m for better performance in tight spots or on steep slopes.

Key Features:

• A wide range of models, from 2 to 1mm/Km accuracy. The best value for money of the market
• Horizontal knobs with unlimited range; DEG and GON circle available
• Compact and light weight, water-resistant construction
• Magnetic-dampened automatic compensator
• Rugged design