Proizvodi

SC2000 GNSS Receiver

On 11 Februara, 2019   /   GNSS antennas  

STONEX SURVEYING SYSTEMS

SC2000 GNSS Receiver

GNSS Reference Station

The Stonex SC2000 GNSS reference receiver is designed to be used either as stand-alone reference station or as part of a series of reference stations. The Stonex SC2000 can be easily configured using a web interface, so a software interface is not required. Moreover, it has a wide OLED display making it easy for any user to configure.

The SC2000 is fully compatible with most common GPS network software and is typically used as an NTRIP server. It also works seamlessly with the Stonex software NTRIP CASTER. It manages many NTRIP connected rovers and, because of its rugged lightweight design, it can be powered by either DC Battery or AC Network to support a temporary GPS network (i.e. construction sites).

The SC2000 GNSS reference receiver runs on a 13,600 mAh battery and has a working time of up to 20 hours. It supports raw data logging with up to 50 Hz update rate. This device has 32 GB of internal memory which allows for the collection and storage of large amounts of data. Available communications include: WiFi and Bluetooth.

DATA SHEET
DOWNLOAD
POŠALJI UPIT

Povezani proizvodi

Back to Top

GNSS Antennas

On 11 Februara, 2019   /   GNSS antennas  

STONEX SURVEYING SYSTEMS

GNSS Antennas

High Precision Antennas for all field survey works

Stonex family of GNSS antennas is designed to enhance and support the performance of Stonex precise positioning receivers. The antennas receive GNSS multi-constellation signals. Each antenna is built to withstand various application and surveying needs.

The Stonex antennas can be used in land survey, marine survey, channel survey, seismic monitoring, bridge survey, container operation and agriculture applications.

They have high gain and wide beam width to ensure the signal receiving performance of satellite at low elevation angle. The phase center of these antennas remains constant as the azimuth and elevation angle of the satellites change. Signal reception is unaffected by the rotation of the antenna or satellite elevation, so placement and installation of the antenna can be completed with ease.

DATA SHEET
DOWNLOAD
POŠALJI UPIT

Povezani proizvodi

Back to Top

S7G GNSS prijemnik

On 11 Februara, 2019   /   GIS & Mobile GNSS, GNSS prijemnici  

S7G GNSS prijemnik

Revolucionarni „džepni“ RTK prijemnik visoke točnosti

Stonex S7-G prijemnik ima internu L1, L2, GPS, GLONASS antenu i prijemnik sa 120 kanala, te za rad u RTK modu unutar BIHPOS-a ne treba vanjsku antenu (antena je dostupna kao dodatna oprema). Ovako ostvarena točnost je unutar granica RTK mjerenja, tj. centimetarska točnost.

Od sada, za dio geodetskih zadataka, ne trebate cijeli “klasični” rover, sa kontrolerom, štapom i prijemnikom. S7-G ima samo 0.9kg, džepnog je formata, otporan na vodu i udarce/padove s baterijom koja traje više od 8 sati.

S7-G izvrsno radi samo s internom GNSS antenom, izuzetno se brzo spaja na mrežu i ostvaruje FIX rješenje.
Testirali smo S7 ispod krošnje drveta i rezultati su bili odlični. Za samo nekoliko sekundi iz “Autonomus” dolazi do “FIX” rješenja (5-10 sek). Koristili smo naravno Carlson SurvCE RTK softver.

Eliminiranjem štapa i vanjske antene otvorile su se nove mogućnosti i brži način rada a da ne govorimo o praktičnosti i jednostavnosti transporta i nošenja samog prijemnika. Lagano, jednostavno, rukovanje samo jednom rukom (tipka za okidanje mjerenja nalazi se baš ispod palca ruke kojim držite uređaj). Ekran je vrlo kontrastan (transreflective) i na direktnom suncu je izuzetno vidljiv.

DATA SHEET
DOWNLOAD
POŠALJI UPIT

Povezani proizvodi

Back to Top